A Jacket, a Riding Habit and an Anglaise

Okay, fun fact: I have done a lot of stuff recently that I didn’t document making all that well.

These three things are really special though because it’s basically three times of “that pattern wasn’t quite right.”

The Ikea Swallowtail Jacket

I made this with an Ikea Ljusöga pillowcase based on the Swallowtail Jacket at Colonial Williamsburg, using the pattern from Costume Close-Up. It was supposed to be a quick and dirty project. Which became kind of funny when I realized that I had made this one for +6′ tall person and had to alter everything to fit my smaller frame.

One key element was that I wanted the lacing in the front and I wanted that lacing to be functional. But I didn’t wanted the functional lacing to go through the fashion fabric. So I put the lacing holes into an extra linen strip directly under the open sides of the front. That means though that I have to pin the fashion fabric to the strip after lacing, otherwise  the lacing holes would show because the fashion fabric layer just doesn’t lay flat.

The stomacher is lined in red, which means I can turn it around, change the lacing to a white silk and get a whole new look. (I have not done this, despite wearing the jacket at one event twice.)

img_0372_opt

Also I had a few lacing holes too many, which in addition to the pinning made this “practical” garment a total pain to lace myself into.

I also made a red petticoat that was supposed to allow some rough handling. It did handle mud okay. But it doesn’t dry very quickly which is not good.

A Riding Habit (ugh)

I basically went for the first worsted wool fabric that looked okay-ish and that was a mistake. I ended up with a really heavy fabric whose feel I didn’t like.

So when I messed up the pattern and ended up missing about 4 inches at my waist, I made the choice (wrong one, obviously) to not undo that and add another fabric piece at the side sesams but rather leaving it open, only held together in the middle of the chest area. (I wanted to be done with that jacket. (Again: mistake.) This meant that I had to make a vest and shirt for sure (instead of cheating), line the jacket’s lapels in light blue silk  and alter it further and further.

So this is my vest and shirt on my dummy double (without the buttons and the buttonholes):

p1050228

 

And these are these things worn by me:

And I love them.

 

Unfortunately, this is the riding habit itself:

p1050327

This is actually the best picture!

And I hate it.

It makes my waist look as large as my boobs which is actually ridiculous, it sits awkwardly on my hips, the sleeves look like they will tear themselves out of their armholes when I actually wear it and it weighs 5+ pounds. (Not awesome if you’re travelling.)

I actually stuffed it in the bottom of my closet. (Anyone wants an ugly, heavy riding habit?)

Ironically I was actually assured that this worsted wool fabric will last forever. The worsted news.

 

A hand-printed cotton Anglaise
I also made a Robe à l’Anglaise out of handprinted Indian cotton (which used plant-based dyes) which is so historically correct that I felt I should have worn a sign that said as much along with it.

The funny thing about this dress was finished so quickly that I failed to document much of the process.

 

The thing was that the cotton was very thin, so I lined the entire robe. (Linen in the bodice, thin cotton for the rest.)

I added the elbow sleeve thingies because I made the sleeves a bit too short. Unfortunately I was so out of fabric that it was all pieced. (That’s why the petticoat is a cheat petticoat that only used the fabric where it showed.) To cover up the pieced-ness of the elbow things I added a bit of ruffle which was even more pieced.

Me wearing it (I fixed the small gap since then.)

Robe de cour – the research

Very late into doing the grand habit de cour, I figured out how to access  Janet Arnold’s article on Princess Sophia Magdalena’s wedding dress from 1766, as published in Costume, the journal of the Costume Society, Issue #1 (1967), p.17-21.

I had no idea what I would find in these five pages, maybe some blahblah, maybe that one bare-bones semi-informative cutting diagram that still hangs around somewhere on the internet, maybe some line drawing.

Instead I got this:

pattern-wp

And more, obviously.

 

Page 17 was a brief description of the dress, page 18 was a line drawing of the bodice with emphasis on the interior (this is the only part of this article that actually can be found on the internet), page 19 is a line drawing of the front and back of the complete dress and pages 20-21  are a cutting and boning diagram of all layers (bodice/petticoat/train) and the gauze sleeves and neckline gauze (palatine).

The only thing that was missing unfortunately was the hooped petticoat (the Livrustkammaren has one, but apparently for a different robe de cour). So if you want to do a robe de cour and need a pattern… well, you can try to find an old copy of this issue of Costume (apparently there was a re-issue) or you can become a member of the Costume Society and grab a digital copy of any of their journal’s back issues.

(Which by the way have other nice patterns, like Janet Arnold’s pattern for the 1660s gown in Bath’s fashion museum or some really intriguing original non-Norah Waugh boning layouts for 18th Century stays in one of their 2000s issues.)

So what does this mean for my robe? Well, first of all my boning layout is pretty good. The major differences are that the boning layer and the fashion layer are not identically cut and that there are more additional bones in the tabs (I don’t know how that works actually – I couldn’t have fit more in mine. Edit: the bones are split vertically in the tabs. Reading is  always key.) And that on the back of the shoulder straps there are a few horizontal bones. Also the fabric is finely corded white silk. Which mine isn’t.

Things that I got right: I have 5mm wide bones, Arnold says the bones in the bodice are 3/16 inches wide which translates to 4.7625mm which is extremely close. 0.24mm is so small that I cannot actually find a good comparison, even the thickness of your fingernail is likely to be greater.

My boning layout in general is pretty on actually. Adding the fashion fabric tabs independently of the main part of the fashion fabric is correct. Adding interlining is good (although I could have added more.) Sewing down the seams is also correct.

All in all, there is no major snafu.

 

So what does this mean for the rest of the gown?

Continue reading

A robe de cour

I always wanted  to make a grand habit de cour / robe de cour / court gown but there were a lot of arguments against it.

  1. There is no easily available pattern, the only existing pattern is a low resolution scan on the internet that does not bother with a boning layout, showing the tabs or whatever layers are necessary.
  2. I’ve seen a fantastic re-created court gown last year but was not as wowed as I thought I ought to be. Which was a bit weird because on one hand it was with little doubt one of the most elaborate 18th Century reproductions that exist. On other I wasn’t into it. Which I took to mean that I wasn’t into the whole concept of the robe de cour.
  3. The material. You can’t do a over-the-top court gown with just some plain silk taffeta and then call it a day. So either you deliver some awesome trimming or you need some special fabric.
  4. The effort. You basically make a fully-boned pair of stays that can only be used for one dress – and that’s just the starting point.

 

And then this fabric arrived at my door step:

P1050146

It’s a vintage piece and it weirdly pre-cut. The short version of this story is that it’s way too nice to not use it for a big gown, and yet there is not enough of it to use it for a traditional 18th Century gown. But you can cut the bodice of a court gown and still have enough fabric for a 1730s type of court gown petticoat.

Something like this:

(c) Hertford Town Council; Supplied by The Public Catalogue Foundation

Princess Anne (1728) by Philippe Mercier – Hertford Town Council; Supplied by The Public Catalogue Foundation

This seem like a contradiction until you realize that piecing this pattern and fabric is a terrible idea.

And since I hate fabric stashes (I hoard enough stuff, I don’t need fabric for something I’ll never make on top of that.), I decided to take the plunge and make a robe de cour.

The first step was taking that low-res pattern and re-work it so it has a boning layout and actually fits me. I did some retro-engineering based on an x-ray of a court dress in Sweden and one of Norah Waugh’s early 18th Century stays to figure out the most likely boning layout. Then I started measuring that one pair of stays that fits me well and dropped my research and numbers and  that low-res scan into Adobe Illustrator. I ended up with a pattern that has actually worked out pretty well so far.

Bildschirmfoto 2016-01-05 um 18.44.19

I altered the tabs further on the fabric version.

I printed the pattern out on transparent paper, started tracing it and its boning channels onto a linen fabric and sewed parts of the outline and all the boning channels.

Then I measured and cut the 174 (!) bones (1/5 inch – 5mm plastic boning), rounded off the edges and stuffed them into the channels. 174 times.

Judging by the few pictures I have of the Swedish court bodices (the only place where anyone bothered to photograph the insides of a court gown bodice), that number must somewhat close to the original. (The width of my boning channels does match up with regular fully-boned 18th Century stays.) Maybe the bones/boning channel are a bit narrower than mine but not by much if at all.

02

Not pictured: the boned shoulder straps.

I also added a thick horizontal metal bone and a busk to the inside of the front bodice and evened everything out a bit by adding some interlining.

P1050171.JPG

I am currently working on at putting these parts together. It’s sloooow because the boning gives the whole thing a very special dynamic.

Patterns of the Seventeenth-Century

Yesterday I stumbled across the two volumes of Seventeenth-Century Women’s Dress Patterns by Susan North and Jenny Tiramani and I was awestruck.  It felt like a “best-of” book of sort, combining Arnold and Waugh’s pattern, with loving Fashion in Detail shots and then completely left everything else behind by featuring photographs from all angles, paintings of similar garments, x-rays, the occasional toile and even how-to’s.

Of course, the how-to part felt a bit like the authors taunting me. But then any how-to that mentions baleen and a complex embroidery that would take a person… a while, has to be a bit of tease.

Ironically the only thing I would really like to copy (aside from the embroideries themselves) is the 1660s gown. It doesn’t look that complic—- actually it does. And I would probably kill myself trying to source the right lace. (I have a thing about period-correct lace. It’s sad, tragic and probably worth a tutorial.) Time to go back to my faux peasantry.